Skip to content

Structural coverage ledger

The scorecard of the structural domain hill climb (#9668): one row per concrete entity of the IFC structural analysis domain per schema, derived from the generated schema tables, plus capability rows. Every status below comes from a probe that ran (tests/structural-coverage/), never from a typed opinion.

Total: 111.5 / 119 rows (met 104, partial 15, missing 0). Cells: 762.5 / 774. A met row counts 1, a partial row 0.5; a passing cell 1, a partial cell 0.5. The score may only go up: node tests/structural-coverage/score.mjs --check tests/structural-coverage/baseline/r13.json fails when the total, the cell score, any row or any cell drops.

Cells not met: out of reach (schema) 12, policy-limited 2, upstream 1. A limit labels a problem no product change can fix: the schemas have no slot or entity for it, a policy forbids the fix, or the fixture's exporter wrote it (tests/structural-coverage/limits.mjs, each with its citation, checked on every run). It never changes a score.

Level Score Pass Partial Fail Skip Not written
fixture 110 / 110 110 0 0 0 0
read 110 / 110 110 0 0 0 0
card 100 / 100 100 0 0 0 0
render 42.5 / 43 42 1 0 0 0
create 110 / 110 110 0 0 0 0
edit 110 / 110 110 0 0 0 0
remove 110 / 110 110 0 0 0 0
convert 61 / 72 58 6 8 0 0
capability 9 / 9 9 0 0 0 0

Summary: tests/structural-coverage/baseline/r13.json, scored over 27 corpus files (tests/structural-coverage/corpus.json).

✅ pass · ◐ partial · ❌ fail · ⏸ skip · · probe not written yet · – not applicable (the rule is in notApplicable() of tests/structural-coverage/catalogue.mjs).

IFC2X3

Entity Family fixture read card render create edit remove convert Row Why not met (measured levels)
IfcBoundaryEdgeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryFaceCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryNodeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryNodeConditionWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcConnectionPointEccentricity resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcFailureConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsStructuralActivity relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsStructuralElement relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsStructuralMember relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsWithEccentricity relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcSlippageConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralAnalysisModel group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralCurveConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 1 problem(s) over 1 record(s): ifcopenshell/generated_structural_coverage_ifc2x3.ifc: 1 of 1 IfcStructuralCurveConnection record(s) in the IFC4 file do not conform to IFC4 (Axis: required value empty…
out of reach (schema): IFC4 IfcStructuralCurveConnection.Axis : IfcDirection is required (IFC4_ADD2_TC1.exp:9415); the IFC2X3 entity declares no attribute (IFC2X3_TC1.exp:7277) and IFC2X3 gives a connection no orientation, so filling Axis would invent it
IfcStructuralCurveMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ◐ ◐ partial convert partial: 1 problem(s) over 14 record(s): ifcopenshell/generated_structural_coverage_ifc2x3.ifc: 1 of 1 IfcStructuralCurveMember record(s) in the IFC4 file do not conform to IFC4 (Axis: required value empty at…
out of reach (schema): IFC4 IfcStructuralCurveMember.Axis is required (IFC4_ADD2_TC1.exp:9423) and IFC2X3 has no Axis (IFC2X3_TC1.exp:7281); the upgrade fills it from IfcRelAssociatesProfileProperties.ProfileOrientation (IFC2X3_TC1.exp:6548), which this source does not have, so filling it would invent it
IfcStructuralCurveMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 1 problem(s) over 1 record(s): ifcopenshell/generated_structural_coverage_ifc2x3.ifc: 1 of 1 IfcStructuralCurveMemberVarying record(s) in the IFC4 file do not conform to IFC4 (Axis: required value em…
out of reach (schema): as IfcStructuralCurveMember: IFC4 requires the inherited Axis (IFC4_ADD2_TC1.exp:9423); the source has no profile orientation to fill it from
IfcStructuralLinearAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLinearActionVarying activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadGroup group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadLinearForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadPlanarForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleDisplacement resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleDisplacementDistortion resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleForceWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadTemperature resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPlanarAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPlanarActionVarying activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralResultGroup group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met

IFC4

Entity Family fixture read card render create edit remove convert Row Why not met (measured levels)
IfcBoundaryEdgeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryFaceCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryNodeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcBoundaryNodeConditionWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcConnectionPointEccentricity resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcFailureConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsStructuralActivity relationship ✅ ✅ – – ✅ ✅ ✅ ◐ ◐ partial convert partial: 4 problem(s) over 11 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc: 3 of 10 IfcRelConnectsStructuralActivity record(s) in the IFC2X3 file do not conform to IFC2X3 (RelatedStructuralA…
out of reach (schema): IFC2X3 RelatedStructuralActivity : IfcStructuralActivity (IFC2X3_TC1.exp:6610); these relationships name curve and surface reactions and a non-constant curve action, which IFC2X3 can hold only as IfcProxy (their own rows); the activity it names came back as another record because IFC2X3 held it only as IfcProxy (same cause as above)
IfcRelConnectsStructuralMember relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcRelConnectsWithEccentricity relationship ✅ ✅ – – ✅ ✅ ✅ ✅ ✅ met
IfcSlippageConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralAnalysisModel group ✅ ✅ ✅ – ✅ ✅ ✅ ◐ ◐ partial convert partial: 1 problem(s) over 2 record(s): structural/analysis-models/beam_01.ifc#72: SharedPlacement "#IFCLOCALPLACEMENT", was null
out of reach (schema): IFC2X3 IfcStructuralAnalysisModel has no SharedPlacement (IFC2X3_TC1.exp:7251); a source that left it empty and one that set it to the placement its items share give the same IFC2X3 file, and IFC4 informal proposition 1 says it is provided when items are grouped
IfcStructuralCurveAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 2 problem(s) over 2 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc#51: lost; ifcopenshell/structural_analysis_curve.ifc#317: lost
out of reach (schema): IFC2X3 has no IfcStructuralCurveAction (IfcStructuralAction ONEOF, IFC2X3_TC1.exp:7230); its varying action has no PredefinedType (IFC2X3_TC1.exp:7312), so a LINEAR or POLYGONAL action cannot come back as such
IfcStructuralCurveConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ◐ ◐ partial convert partial: 4 problem(s) over 4 record(s): structural/analysis-models/slab_01.ifc#62: Axis null, was "#IFCDIRECTION"; structural/analysis-models/slab_01.ifc#72: Axis null, was "#IFCDIRECTION"; structural/analysi…
out of reach (schema): IFC2X3 IfcStructuralCurveConnection declares no attribute (IFC2X3_TC1.exp:7277) and IFC2X3 gives a connection no orientation, so its Axis (IFC4_ADD2_TC1.exp:9415) cannot be held
IfcStructuralCurveMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ◐ ◐ partial convert partial: 1 problem(s) over 3 record(s): ifcopenshell/generated_structural_edge_curve.ifc: 2 of 2 IfcStructuralCurveMember record(s) in the IFC2X3 file do not conform to IFC2X3 (OwnerHistory: required value em…
policy-limited: IfcRoot.OwnerHistory is OPTIONAL in IFC4 (IFC4_ADD2_TC1.exp:8891) and required in IFC2X3 (IFC2X3_TC1.exp:6905); the source has no IfcOwnerHistory, and the downgrade never invents one (#4686)
IfcStructuralCurveMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralCurveReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 4 problem(s) over 4 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc#57: lost; ifcopenshell/structural_analysis_curve.ifc#2773: lost; ifcopenshell/structural_analysis_curve.ifc#2781: lo…
out of reach (schema): IFC2X3 IfcStructuralReaction is ONEOF(IfcStructuralPointReaction) (IFC2X3_TC1.exp:7480): no IFC2X3 entity holds a curve reaction
IfcStructuralLinearAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadCase group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadConfiguration resource ✅ ✅ ✅ – ✅ ✅ ✅ ❌ ◐ partial convert fail: 5 problem(s) over 5 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc#23: no IfcStructuralLoadConfiguration with its values came back; ifcopenshell/structural_analysis_curve.ifc#326: no …
out of reach (schema): IFC2X3 has no IfcStructuralLoadConfiguration (IFC4_ADD2_TC1.exp:9470); it holds the loads only on a varying action, located by point representations of that action's own shape (IFC2X3_TC1.exp:7314). Each of these configurations has a Name, which nothing in IFC2X3 holds, or is applied by an action with no shape or by a curve reaction, which IFC2X3 lacks
IfcStructuralLoadGroup group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadLinearForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadPlanarForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleDisplacement resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleDisplacementDistortion resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleForce resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadSingleForceWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralLoadTemperature resource ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPlanarAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralPointReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralResultGroup group ✅ ✅ ✅ – ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ ✅ met
IfcStructuralSurfaceMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ◐ ◐ partial convert partial: 1 problem(s) over 2 record(s): ifcopenshell/generated_structural_surface_member.ifc: 1 of 1 IfcStructuralSurfaceMember record(s) in the IFC2X3 file do not conform to IFC2X3 (OwnerHistory: required va…
policy-limited: IfcRoot.OwnerHistory is OPTIONAL in IFC4 (IFC4_ADD2_TC1.exp:8891) and required in IFC2X3 (IFC2X3_TC1.exp:6905); the source has no IfcOwnerHistory, and the downgrade never invents one (#4686)
IfcStructuralSurfaceMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 1 problem(s) over 1 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc: 1 of 1 IfcStructuralSurfaceMemberVarying record(s) in the IFC2X3 file do not conform to IFC2X3 (SubsequentThickness…
out of reach (schema): IFC2X3 requires SubsequentThickness LIST [2:?] and VaryingThicknessLocation (IFC2X3_TC1.exp:7522, :7523), which IFC4 does not have (IFC4_ADD2_TC1.exp:9652); the source gives no Pset_StructuralSurfaceMemberVaryingThickness, so filling them would invent thicknesses
IfcStructuralSurfaceReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ ❌ ◐ partial convert fail: 1 problem(s) over 1 record(s): ifcopenshell/generated_structural_coverage_ifc4.ifc#59: lost
out of reach (schema): IFC2X3 IfcStructuralReaction is ONEOF(IfcStructuralPointReaction) (IFC2X3_TC1.exp:7480): no IFC2X3 entity holds a surface reaction
IfcSurfaceReinforcementArea resource ✅ ✅ ✅ – ✅ ✅ ✅ ❌ ◐ partial convert fail: 1 problem(s) over 1 record(s): ifcopenshell/generated_structural_coverage_ifc4_reinforcement.ifc: IFC4 -> IFC2X3 -> IFC4 threw: Cannot convert #15=IFCSURFACEREINFORCEMENTAREA('Coverage reinforcement'…
out of reach (schema): IFC2X3 has no IfcSurfaceReinforcementArea (IFC4_ADD2_TC1.exp:9769) and it is no IfcRoot, so it cannot become an IfcProxy; the converter refuses the file

IFC4X3

Entity Family fixture read card render create edit remove convert Row Why not met (measured levels)
IfcBoundaryEdgeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcBoundaryFaceCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcBoundaryNodeCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcBoundaryNodeConditionWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcConnectionPointEccentricity resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcFailureConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcRelConnectsStructuralActivity relationship ✅ ✅ – – ✅ ✅ ✅ – ✅ met
IfcRelConnectsStructuralMember relationship ✅ ✅ – – ✅ ✅ ✅ – ✅ met
IfcRelConnectsWithEccentricity relationship ✅ ✅ – – ✅ ✅ ✅ – ✅ met
IfcSlippageConnectionCondition resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralAnalysisModel group ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralCurveAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralCurveConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralCurveMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralCurveMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralCurveReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralLinearAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralLoadCase group ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadConfiguration resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadGroup group ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadLinearForce resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadPlanarForce resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadSingleDisplacement resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadSingleDisplacementDistortion resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadSingleForce resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadSingleForceWarping resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralLoadTemperature resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralPlanarAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralPointAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralPointConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralPointReaction activity ✅ ✅ ✅ ◐ ✅ ✅ ✅ – ◐ partial render partial: 1 problem(s) over 7 record(s): 2 of 7 record(s) with a non-zero reaction draw no glyph: structural/puntal-alfa/portal-demo.ifc#161, structural/puntal-alfa/portal-demo.ifc#163
upstream: puntal-alfa/portal-demo.ifc #161 and #163 have no ObjectPlacement, no Representation and no IfcRelConnectsStructuralActivity, so nothing places them; the exporter should connect each reaction to its point connection
IfcStructuralResultGroup group ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met
IfcStructuralSurfaceAction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralSurfaceConnection item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralSurfaceMember item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralSurfaceMemberVarying item ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcStructuralSurfaceReaction activity ✅ ✅ ✅ ✅ ✅ ✅ ✅ – ✅ met
IfcSurfaceReinforcementArea resource ✅ ✅ ✅ – ✅ ✅ ✅ – ✅ met

Capabilities

Capability Round Status Probe Why not met
Read the physical-to-analytical link (IfcRelAssignsToProduct, IfcRelConnectsStructuralElement) (cap/physical-analytical-link-read) R1 ✅ capability:physical-analytical-link-read
Toggle between the analytical and the physical model in the viewer (cap/analytical-physical-toggle) R5 ✅ capability:analytical-physical-toggle
Derive an analytical model from the physical model (cap/derive-analytical-model) R6 ✅ capability:derive-analytical-model
Check: load-bearing element with no analytical counterpart (cap/check-unlinked-load-bearing) R7 ✅ capability:check-unlinked-load-bearing
Check: analytical axis drifted from the physical element (cap/check-axis-drift) R7 ✅ capability:check-axis-drift
Check: structural member with no connection (cap/check-unconnected-member) R7 ✅ capability:check-unconnected-member
Check: analytical model stale after a physical change (cap/check-stale-after-physical-change) R7 ✅ capability:check-stale-after-physical-change
CLI structural command (cap/cli-structural-command) R8 ✅ capability:cli-structural-command
Structural analysis docs page (cap/docs-page) R8 ✅ capability:docs-page

Regenerating

node tests/structural-coverage/score.mjs   # names the fetch command for any absent corpus file, then exits 2
node tests/structural-coverage/score.mjs --out tests/structural-coverage/.out/summary.json --check tests/structural-coverage/baseline/r13.json
cp tests/structural-coverage/.out/summary.json tests/structural-coverage/baseline/r<N>.json   # only when a round is accepted
node scripts/generate-structural-coverage-ledger.mjs